OFFICIAL METADATA
India standards
23,903 indexed records. Search by identifier or title. Chinese national standards retain their official Chinese titles; translated descriptions are not substituted for the normative text.
| Standard | Title | Status |
|---|---|---|
| IEC 61000 (Part 5/Sec 2):2026 | Electromagnetic Compatibility EMC Part 5: Installation and Mitigation Guidelines Section 2: Earthing and Cabling | In force |
| IEC 61196 (Part 1/Sec 105):2026 | Coaxial Communication Cables Part 1- Electrical Test Methods Section 105 Test for Withstand Voltage of Cable Dielectric First Revision | In force |
| IS 10 (Part 1):1990 | Plywood Tea-Chests - Specification: Part 1 General (Fifth Revision) | In force |
| IS 10 (Part 2):2013 | Plywood Tea-Chests - Specification: Part 2 Plywood (Sixth Revision) | In force |
| IS 10 (Part 3):1974 | Specification for Plywood Tea-Chests: Part 3 Battens (Fourth Revision) | In force |
| IS 10 (Part 4):1989 | Plywood Tea-Chests - Specification: Part 4 Metal Fittings (Fifth Revision) | In force |
| IS 10 (Part 5):1976 | Specification for Plywood Tea-Chests: Part 5 Assembly and Packing (Fourth Revision) | In force |
| IS 10000 (Part 1):1980 | Methods of tests for internal combustion engines: Part 1 glossary of terms relating to test methods | In force |
| IS 10000 (Part 10):1980 | Methods of tests for internal combustion engines: Part 10 tests for smoke levels, limits and corrections for smoke levels for variable ,speed compression ignition engines | In force |
| IS 10000 (Part 11):1980 | Methqds of tests for internal combustion engines: Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine | In force |
| IS 10000 (Part 12):1980 | Methods of tests for internal combustion engines: Part 12 specimen test certificates | In force |
| IS 10000 (Part 13):2002 | Methods of tests for internal combustion engines: Part 13 recommendations on nature of tests required for functional changes in critical components | In force |
| IS 10000 (Part 2):1980 | Methods of tests for internal combustion engines Part 2 standar d reference conditions | In force |
| IS 10000 (Part 3):1980 | Methods of tests for internal combustion engines: Part 3 measurements for testing - Units and limits of accuracy | In force |
| IS 10000 (Part 4):1980 | Methods of tests for internal combustion engines: Part 4 declaration of power, efficiency, fuel consumption and lubricating oil consumption | In force |
| IS 10000 (Part 5):1980 | Methods of tests for internal combustion engines: Part 5 preparation for tests and measurements for wear | In force |
| IS 10000 (Part 6):1980 | Methods of tests for internal combustion engines: Part 6 recording of test results | In force |
| IS 10000 (Part 7):1980 | Methods of tests for internal combustion, engines: Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators | In force |
| IS 10000 (Part 8):1980 | Methods of tests for internal combustion engines Part 8 performance tests | In force |
| IS 10000 (Part 9):1980 | Methods of tests for internal combustion engines: Part 9 endurance tests | In force |
| IS 10001:1981 | Performance Requirements for Constant Speed Compression ignition (diesel) engines for general purposes (up to 20 kW) | In force |
| IS 10002:1981 | Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Above 20 KW) | In force |
| IS 10007:1981 | Lifeboats' Steel Blocks | In force |
| IS 10008:2024 | Beater Addition Jointings Specification | In force |
| IS 10009:1981 | Specification For Breaker And Holder, Razor Blade, Barraquer's Pattern | In force |
| IS 10009:2026 | Breaker And Holder, Razor Blade, Barraquer's Pattern- Specification | In force |
| IS 1000:2021 | Edible Lactose — Specification (Second Revision) | In force |
| IS 10010:2022 | Textile Dyestuffs - Method for Evaluation of Strength and Shade of Pigment Dispersion by Printing Method (First Revision) | In force |
| IS 10011:2022 | Dentistry Polymer-based restorative materials Second Revision | In force |
| IS 10013 (Part 1):1981 | Water Soluble Type Wood Preservatives: Part 1 Acid-Copper-Chrome (Acc) Preservative | In force |
| IS 10013 (Part 2):1981 | Water Soluble Type Wood Preservatives: Part 2 Copper-Chrome-Arsenic (Cca) Wood Preservative | In force |
| IS 10013 (Part 3):1981 | Water Soluble Type Wood Preservatives: Part 3 Copper-Chrome-Boron (Ccb) Wood Preservative | In force |
| IS 10014 (Part 1):1984 | Methods of Tests for Man-Made Staple Fibres Part 1 Determination of Length | In force |
| IS 10016 (Part 1):1981 | Methods of test for polybutadiene rubbers: Part 1 method of taking out test portions from sample bales | In force |
| IS 10016 (Part 2):1984 | Methods of test for polybutadiene rubbers: Part 2 determination of ash | In force |
| IS 10016 (Part 4):1984 | Methods of test for polybutadiene rubbers: Part 4 determination of cis, trans and vinyl structure | In force |
| IS 10016 (Part 5):1981 | Methods of test for polybutadiene rubbers: Part 5 determination of gel content | In force |
| IS 10016 (Part 6):2000 | Methods of test for polybutadiene rubbers: Part 6 evaluation of vulcanization characteristics of polybutadiene rubbers (Br : 2) | In force |
| IS 10017:1981 | Code of practice for construction of cocoa beans storage structures | In force |
| IS 10018:1981 | Specification for lacquer, cellulose nitrate, clear, finishing, glossy for wood | In force |
| IS 10019:1981 | Specification for mild steel stays and fasteners | In force |
| IS 1001:1991 | Synthetic rubber proofed/coated fuel pump diaphragm fabric - specification (first revision) | In force |
| IS 10020 (Part 4):1981 | Recommendations for design and construction of port and harbour components: Part 4 slipways | In force |
| IS 10021:2000 | Guidelines for de - Icing system for hydraulic installations (First Revision) | In force |
| IS 10022:1981 | Specification for open ended cogged V - Belting | In force |
| IS 10023:1981 | Specification for ascenders for mountaineering | In force |
| IS 10025:2025 | POLISH, LIQUID (WHITE), FOR CANVAS FOOTWEAR - SPECIFICATION (First Revision) | In force |
| IS 10026 (Part 1):1998 | Insulating varnishes containing solvents: Part 1 definitions and general requirements (First Revision) | In force |
| IS 10026 (Part 2):1999 | Insulating varnishes containing solvents: Part 2 methods of tests (First Revision) | In force |
| IS 10026 (Part 3/Sec 1):1999 | Insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 1 requirements for cold curing finishing varnishes (First Revision) | In force |
| IS 10026 (Part 3/Sec 2):1999 | Insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 2 requirements for hot curing varnishes (First Revision) | In force |
| IS 10026 (Part 3/Sec 3):1983 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 3 air drying varnishes with temperature index 130 | In force |
| IS 10026 (Part 3/Sec 4):1983 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 4 baking varinishes with temperature index 120 | In force |
| IS 10026 (Part 3/Sec 5):1983 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 5 baking varnishes with temperature index 130 | In force |
| IS 10026 (Part 3/Sec 6):1983 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 6 baking varnishes with temperature index 155 | In force |
| IS 10026 (Part 3/Sec 7):1983 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 7 baking varnishes with temperature index 180 | In force |
| IS 10026 (Part 3/Sec 8):1986 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 8 baking varnishes with temperature index 200 | In force |
| IS 10026 (Part 3/Sec 9):1986 | Specification for insulating varnishes containing solvents: Part 3 specifications for individual materials: Sec 9 baking varnishes with temperature index 130 for magnetic core sheets | In force |
| IS 10027:2018 | Composite units of air - Break switches and rewirable type fuses for voltages not exceeding 650 v a.c. - Specification (Second Revision) | In force |
| IS 10028 (Part 1):1985 | Code of practice for selection, installation and maintenance of transformers: Part 1 selection | In force |
Page 1
To inspect the official record, use the source link in the Chinese-language record or search the publisher's catalogue by standard number. GlobeNorm does not reproduce paid normative text.